Midtronics GRX-3080 JLR EU - Manual Entry; Version Info

GRX-3080 JLR EU STANDALONE
Midtronics B.V. Hoofdveste 6 Houten NL
www.midtronics.com
32
Chapter 11: Utility Menu
entered, press NEXT to continue. Press STOP to exit the
character map and return to the Utility menu.
4. Use  or  to select the SECURITY TYPE of the network
you want to use and press SELECT.
1  OPEN
2  WEP
3  WPA
4  WPA2
5. In case of WEP use  or  to select the WEP TYPE of the
network you want to use and press SELECT.
1  64 BIT
2  128 BIT
6. S elect the KEY slot for the WEP network that you want to
use and press SELECT.
1  KEY 1
2  KEY 2
3  KEY 3
4  KEY 4
7. If the chosen network is password protected, use the
keyboard to enter the password and press NEXT.
A conrmation message is displayed when the charger
is successfully connected to the WiFi network.
8. Press EXIT to return to the Utility menu.
Manual Entry
Select MANUAL ENTRY to manual setup the parameters
required for connecting to your specic WiFi network.
3. Use the alphanumeric keypad to enter the network
SSID.
Use  to access the lower case and symbol character
maps.
Once all of the alphanumeric characters have been
entered, press NEXT to continue. Press STOP to exit the
character map and return to the Utility menu.
4. Use  or  to select the SECURITY TYPE of the network
you want to use and press SELECT.
1  OPEN
2  WEP
3  WPA
4  WPA2
5. In case of WEP use  or  to select the WEP TYPE of the
network you want to use and press SELECT.
1  64 BIT
2  128 BIT
6. S elect the KEY slot for the WEP network that you want to
use and press SELECT.
1  KEY 1
2  KEY 2
3  KEY 3
4  KEY 4
7. If the chosen network is password protected, use the
keyboard to enter the password and press NEXT.
A conrmation message is displayed when the charger
is successfully connected to the WiFi network.
8. Press EXIT to return to the Utility menu.
NOTE: Consult your IT department for the
specic technical parameters for your WiFi
security protocol, including the name of
the network, the encryption type, key, and
password.
Version info
The VERSION utility displays the current software version,
the software release date and the serial number of the
charger.
GRX-3080 JLR
V2.2
VERSION 192-210192D
EEPROM
192-230163D
ALG VER 271-Z00129A
SERIAL # 012345678
BUILD 1
GRX-3080 JLR
V2.2
POWER SUPPLY 1.0.1.5
CCA 192-120094D
DMM NO HW
WIFI 192-020231A
GRX-3080 JLR
V2.2
SERIAL NO HW
ZIGBEE NO HW
ETHERNET NO HW
BLUETOOTH NO HW
The above is an example of the screens