• 18 •
Changing the Printer Paper
The MDX-P300 integrated printer is shipped with a roll of thermal printing
paper installed in the paper compartment. The roll size is 2-1/4 inches
wide by 1-7/8 inch in diameter. Replacement rolls are available at most
office supply stores.
The tester uses only thermal printing paper. Below are four major office
supply stores that carry the recommended paper:
Store Part Number Phone
Office Depot 209-653-271 800-463-3768
Office Max 20121146 800-283-7674
Quill 856607 800-789-1331
Staples 531236 800-378-2753
To replace the paper roll:
1. Unlock the printer door by gently pressing forward on the red lever.
Remove the spent roll.
2. Place a new roll of paper in the compartment, and pull the paper for-
ward so that it extends past the serrated edge of the paper slot.
paper
compartment
release lever: press in this direction
paper
sensor
paper feeds from
underneath the roll
To Next Page
Loading...
Need help?
General
