Before using for the first time
23
Before using for the first time
Remove any protective foil and
stickers from the machine. Exception:
Please do not remove any labels (e.g.
the data plate) which are visible when
you pull out the lower panel.
Remove the protective foil from the
drip tray cover and place the drip tray
cover into the lower panel.
Place the coffee machine on a level,
flat surface that is not sensitive to
water (see “Installation”).
Clean the appliance thoroughly
before filling it with water and coffee
beans (see "Cleaning and care").
Insert the plug of the coffee machine
into the electrical socket and switch it
on at the socket (see "Electrical
connection").
Remove the water container and fill it
with cold, fresh tap water. Only fill the
water container up to the “max.”
marker and then refit it in the machine
(see "Filling the water container").
Take the lid off the coffee bean
container, fill it with roasted coffee
beans and replace the lid (see "Filling
the coffee bean container").
Switching on for the first time
Touch the On/Off sensor.
Selecting the display language and
country
Select the required display language.
Then select the country.
Setting up the network (Miele@home)
You can connect your coffee machine
to your local Wi-Fi network.
The following appears during set-up:
Set up Miele@home
Useful tip: You can also set up
Miele@home for your coffee machine at
a later time. In this case, select Skip.
Make sure that the signal of your Wi-
Fi network is sufficiently strong in the
place where you want to set up your
coffee machine.
Touch Continue.
Select the connection method you
wish to use.
Follow the instructions in the coffee
machine display and in the
Miele@mobile App.
Connection successfully established
appears in the display.
Touch Continue to continue setting up.
Setting the water hardness level
Contact your local water supplier to
find out your local water hardness
range if necessary.
See “Settings - Water hardness” for
more information.
To Next Page
Loading...
Need help?
General
