Switching on and off
27
Switching the coffee machine
on
Touch the On/Off sensor.
The coffee machine heats up and rinses
the pipework. Hot water will run out of
the central spout.
When Select drink appears in the display,
you can prepare drinks.
If the coffee machine is already at
operating temperature, rinsing will not
take place.
If you do not touch any sensors or run
any maintenance programmes, the
display will switch itself off after approx.
7minutes to save energy. The OK
sensor will flash on and off as long as
the appliance is switched on.
Touch any one of the sensors to wake
the coffee machine up again to make
a drink.
Switching the coffee machine
off
Touch the On/Off sensor.
If a drink has been dispensed, the
coffee machine will rinse the pipework
automatically before switching off.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday, please do the
following:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
If necessary, switch off the coffee
machine, switch it off at the socket
and unplug it to disconnect it from
the power supply.
To Next Page
Loading...
Need help?
General
