Cleaning and care
56
Remove the lid from the container
and wash it by hand.
Clean the water container in the
dishwasher, or by hand using warm
water and a little washing-up liquid
applied with a soft cloth. After
cleaning, dry the water container.
Carefully clean and dry the surface
the water container sits on,
particularly the recesses.
Fit the lid back on the water
container.
Make sure that the valve, the
underside of the water container and
the surface the water container sits on
are clean. Otherwise, the water
container will not sit correctly.
Removing and cleaning the
water container filter
Clean the water container filter once a
month.
The water container filter is located
underneath the water container.
Remove the water container.
Unscrew the cap. Remove the sealing
ring and the filter.
Rinse individual parts carefully under
running water.
Then replace the water container filter
(with the cross facing upwards) and
then the sealing ring. The opening of
the seal should face downwards.
Finally screw the cap back on tightly.
Push the water container back into
the machine.
Dismantling and cleaning the
central spout
Clean the central spout’s stainless
steel cover by hand only, using
warm water and a little washing-up
liquid.
All other parts are dishwasher-safe.
To Next Page
Loading...
Need help?
General
