Cleaning and care
63
You need 1 sachet of cleaning agent for
milk pipework for the maintenance
programme.
Touch .
Select Maintenance| Clean milk
pipework.
The cleaning process cannot be
cancelled. It must be completed
through to the end.
Confirm with OK.
The process will start.
Follow the instructions in the display.
Remove the water container. Fill it with
cleaning solution (see operating instructions)
and refit it. appears in the display.
Preparing the cleaning solution
For optimal cleaning results, we
recommend the Miele Cleaning agent
for milk pipework. The cleaning agent
was specially developed for Miele
coffee machines and prevents damage
to the machine due to unsuitable
cleaning agents.
It is available to order from the Miele
online shop or directly from Miele (see
the end of this booklet for contact
details).
Add 1 sachet of cleaning agent for
milk pipework to a container and pour
in 300ml of lukewarm water. Stir the
solution with a spoon until the
cleaning powder has fully dissolved.
Remove and empty the water
container.
Pour the prepared cleaning solution
into the water container. Push the
water container back into the
machine.
Follow the further instructions given
in the display.
If prompted in the display, carefully
rinse out the water container with
clean water. Ensure that no cleaning
agent is left in the water container. Fill
the water container with water.
The cleaning process is finished when
the drinks menu appears in the display.
To Next Page
Loading...
Need help?
General
