Problem Possible cause and remedy
The "Start at" and
"Ready at" functions
have not worked.
These functions will not work for the "Descaling"
programme.
The temperature in the oven is too high, e.g. after a
programme has finished.
^
Open the door and let the oven cool down.
The oven lighting is
not working.
The lamp is defective.
Call Miele Service to have the lamp replaced.
F and a number
appear in the
display.
F 44 Communication fault
^ Switch the appliance off and then back on again after a
few minutes.
If the fault code appears in the display again call Miele
Service.
F..
Other fault codes
Technical fault
^ Switch the appliance off and call Miele Service.
Problem solving guide
99
To Next Page
Loading...
