Operation: Combination cooking mode
45
Advanced operation
Setting further durations
You have placed the food in the oven
and selected the settings for the
programme.
You can set the programme to switch
on and off automatically by setting
Ready at or Start at.
– Ready at
You specify the time you want
cooking to stop.
– Start at
You specify the time you want
cooking to start.
Cooking results can be impaired if
there is a long delay between the
food being placed in the oven and
the start of cooking. Fresh food can
change colour and even deteriorate.
If the temperature in the oven is too
high, e.g. just after another
programme, you will not be able to
use this function. Ready at and Start at
will not appear in the display if this is
the case. Open the oven door until the
appliance has cooled down.
A Ready at time cannot be entered if
you are using the food probe. When
using the food probe, the end of the
cooking duration is determined by
when the set core temperature is
reached. Only Start later can be
selected.
Switching on and off automatically
To switch a cooking programme on and
off automatically you have a choice of
how to enter the time parameters:
– Duration and Ready at
– Duration and Start at
Example: it is 11:45. The food takes 5
minutes to cook and should be ready at
12:30.
Enter a cooking duration of 5 minutes
for the 1st cooking stage (see
"Simple operation").
When you have selected the settings for
the cooking process:
Select Ready at and set 12:30.
Confirm with OK.
Start at is calculated automatically.
Start at 12:25 appears in the display.
The cooking programme will start
automatically at this time.
To Next Page
