IMPORTANT SAFETY INSTRUCTIONS
11
Technical safety
Installation, repair and maintenance work should be performed by
a Miele authorized service technician in accordance with national
and local safety regulations and the provided installation instruc-
tions. Contact Miele’s Technical Service Department for examination,
repair or adjustment. Repairs and other work by unauthorized per-
sons could be dangerous and may void the warranty.
A damaged appliance is dangerous. Check the appliance for any
visible damage. Never install or attempt to use a damaged appli-
ance.
Reliable and safe operation of this steam oven can only be as-
sured if it has been connected to the power supply.
Be certain your appliance is properly installed and grounded by a
qualified technician. To guarantee the electrical safety of this appli-
ance, continuity must exist between the appliance and an effective
grounding system. It is imperative that this basic safety requirement
be met. If there is any doubt, have the electrical system of the house
checked by a qualified electrician.
Before connecting the appliance to the power supply, ensure that
the connection data on the data plate (voltage and frequency) match
the power supply.
This data must correspond in order to avoid the risk of damage to
the appliance. Consult a qualified electrician if in any doubt.
Do not use an extension cord to connect this appliance to the
power supply. Extension cords do not guarantee the required safety
of the appliance.
For safety reasons, this appliance may only be used after it has
been built in.
This steam oven must not be used in a non-stationary location
(e.g. on a ship).
To Next Page
Loading...
Need help?
General
