IMPORTANT SAFETY INSTRUCTIONS
12
Tampering with electrical connections or components and me-
chanical parts is highly dangerous to the user and can cause opera-
tional faults. Do not open the outer casing of the appliance.
While the appliance is under warranty, repairs should only be per-
formed by a Miele-authorized service technicians. Work by unquali-
fied persons could be dangerous and may void the warranty.
Defective components should be replaced by Miele original parts
only. Only with these parts can the manufacturer guarantee the
safety of the appliance.
If the plug has been removed or the power cord is not supplied
with a plug, the steam oven must be connected to the power supply
by a suitably qualified electrician.
If the power cord is damaged, it must be replaced with a special
connection cable typeH05VV-F (PVC insulated). See "Electrical
connection."
Before installation, maintenance, and repair work, the steam oven
must be disconnected from the electrical supply. It is only com-
pletely isolated from the electrical supply if: the fuse has been re-
moved (where applicable), the main circuit breaker has been tripped,
or the power cord has been unplugged from the wall outlet. Always
be sure to pull the plug not the cord.
During installation, maintenance and repair work, the appliance
must be disconnected from the main electricity supply. It is only
completely isolated from the electricity supply when:
– The circuit breakers have been switched off, or
– The fuses of the electrical installation have been completely re-
moved, or
– Unplug (if plug present) the machine from the outlet. Pull the plug
not the cord.
To Next Page
Loading...
Need help?
General
