Technical Information
198
G 1xxx/G 2xxx
Function Programming Display
Reset
Select Reset. To restore
the standard settings,
select OK. To return to the
main menu, press Back.
The display reads Reset factory
default settings?
Setting the language
Select Language.
Select a language and
confirm with OK.
The display lists the languages that
can be selected. A language must
be selected in order to return to the
main menu.
Setting the time of day
Select Time of day.
Select a submenu and
confirm with OK.
The submenus Format and Set
manually can be selected.
Format
Choose 24- or 12-hour
setup and confirm with
OK.
Display of both clock formats.
Set manually
Set the time (seconds,
then minutes) using the +
and - buttons and confirm
with OK.
Entry request is indicated.
Setting the detergent type
Select Detergent type.
Select a detergent type
and confirm with OK.
The display shows the selection of
available detergent types: Normal
(powder detergent), 2 in 1, 3 in 1,
and Liquid detergent.
Dispensed rinse aid
quantity setting
Select Rinse aid. Select a
rinse aid quantity with the
+ and - buttons and
confirm with OK.
The display shows the current rinse
aid dispensing quantities: The
dispensed quantity can be set at
levels of approximately 0 - 0.2 fl.oz.
(0 - 6 mL). Standard setting: 0.1
fl.oz. (3mL).
Setting the intervals for
the filter checks
Select Check filters.
Select a wash interval and
confirm with OK.
The display shows the intervals
available for selection. Range: 30 -
60 wash cycles.
Adjust Sensor wash
program
1
Select Adjust sensor
wash. Select a setting and
confirm with OK.
Setting options On and Off
(standard setting). With this
parameter, Sensor wash can be
adjusted for use against stubborn
stains (if overall soiling is
moderate). If this option is selected,
the main wash temperature is
raised to 131°F, resulting in an
extended running time.
Changing the main menu
Select Change main
menu. Select a wash
program for position 1,
press Continue, and do
exactly the same for
positions 2 and 3. After all
changes have been made,
confirm with Finished and
return to the main menu.
The display shows the programs
available. The order of the first
three can be modified. After fixing
and confirming a new order, the list
is shown again.
To Next Page
Loading...
Need help?
General
