Miele G 1 Series Technical Information

Technical Information
199
G 1xxx/G 2xxx
Function Programming Display
Save extras
Select Save extras.
Select a setting and
confirm with OK.
This function is activated in the
standard settings. In the display,
this is signaled with the message
On. If you do not wish to save,
select Off.
Setting the temperature
format
Select Temperature.
Select a format and
confirm with OK.
The temperature can be displayed
in °C or °F as desired.
Activating/deactivating
the buzzer
Select Buzze
r
.
Select a setting and
confirm with OK.
The options Off, Normal and Loud
are shown in the display.
Activating/deactivating
the confirmation tone
Select Keypad tone.
Select a setting and
confirm with OK.
Options: On (standard), Off.
Brightness adjustment
Select Brightness. Select
a setting using the
Dimmer and Brighter
buttons and confirm with
OK.
The brightness of the display can
be set in 17 levels, with level 8 as
the standard setting. Brightness
levels are displayed in bar form.
Activating/deactivating
the memory
Select Memory. Select a
setting and confirm with
OK.
Options: On (standard setting) and
Off. The memory function saves the
last selected program.
Activating the dealer
demo mode
Select Deale
r
. Select a
setting and confirm with
OK.
For options, see Section 080-
4.2.13.
Resetting standard
settings
Select Factory de
f
ault.
To reset the parameters
(settings) modified by the
customer to their standard
settings, confirm with OK.
The display reads Reset factory
default settings?
Adjusting the wash/final
rinse temperature
Select Temperatures.
Select Main wash or Final
rinse. Make a setting and
confirm with OK.
Options: Normal and Increased.
Increased wash temperature results
in a longer running time.
Water quantity
normal/increased
Select Water plus. Select
a setting; confirm with OK.
Options: Normal and Increased. If
Increased is selected, water intake
increases by 16.7 fl.oz. (500mL).
Activating/deactivating
sensor softener, manually
setting water hardness
2
Select Water hardness.
Select a setting and
confirm with OK.
A
utomatic = Sensor softener
activated. The water hardness at
the installation site can also be
manually set. Water hardness
range: 1°d to 70°d (1.1 to 74.9 gpg).
For information on external water
softeners, see Section 080-4.2.14.
Program running
time reduction
Select Shorten the
program. Make the
desired selection and
confirm with OK.
The display shows the options On
and Off (standard setting).
Program-dependent running time is
reduced by reducing temperatures
and/or canceling holding times.

Miele G 1 Series Specifications

General

Brand	Miele
Model	G 1 Series
Category	Dishwasher
Language	English