Interrupting a program
A program can be interrupted by open
-
ing the door.
Once the door is closed, the program
will continue from the point it was at
when the door was opened.
Warning!
The water in the dishwasher may
be hot, and steam may be pres
-
ent! Only open the door if abso
-
lutely necessary and exercise ex
-
treme caution when doing so.
There is a danger of being
burned.
Changing a program
If a program has already started and
you wish to change it proceed as fol
-
lows:
^
Turn the program selector (18) to the
“Stop” position.
^
Leave the program selector (18) in
this position for at least one second.
^
Then turn the program selector (18)
to the program you wish to use.
^
Press the “Start” button (20).
The program starts.
Operating the dishwasher
33
To Next Page
Loading...
