Problem solving guide
With the aid of the following guide, minor problems can be corrected without a
service call.
Any work required on the electrical components of the appliance should only
be performed by a qualified and trained person in accordance with local and
national regulations. Unauthorized repairs could be dangerous.
Problem Possible cause Remedy
The “Start” indicator
does not light after
pressing the On/Off but
-
ton.
The door is not closed
tightly.
Close the door com
-
pletely.
The machine is not
plugged in.
Insert the plug.
The circuit breaker is de
-
fective or has “tripped”.
Reset the circuit breaker.
The “Start” indicator
light is on, but the dish-
washer is not running.
The program selector is in
the “Stop” position.
– Turn the program se-
lector to the desired
program.
– Press the “Start” but-
ton.
The dishwasher stops
during a program
The circuit breaker has
“tripped”.
Reset the circuit breaker.
The “Intake/Drain” indi-
cator lights during the
“Energy Saver” pro
-
gram.
The water entering the
machine is not at the min
-
imum temperature of
45 °C/115 °F.
– Restart the program.
–
If the indicator lights
again, select a different
program.
Problem solving guide
41
To Next Page
Loading...
