Installation instructions
Underbench-oven with hob
controls (cooker)
Turn off the mains electricity supply
to the isolator.
Connect cooker cable to isolator.
Align the cooker in front of the base
unit.
Connect the hob plug to the socket
on the cooker.
Push the appliance into the oven
base unit as far as the oven trim and
align.
Then open the oven door and screw
the oven to the side panels of the
base unit through the two holes, one
on each side of the oven trim.
The appliance must only be oper-
ated when it has been built in.
62
To Next Page
Loading...
