Miele H 5681 BPL User Manual

To operate the oven manually, switch
the appliance on, select the oven
function and temperature, then
switch it off again once you have
finished cooking.
^
Place the food in the oven.
^
Switch the oven on with the K
sensor.
The Main menu will appear in the
display.
^
Select the required function.
The sub-menu for the oven funtion you
require will show in the display, and the
recommended temperature will light up.
^ Change the temperature in the
display if necessary.
The oven heating and the cooling fan
will switch on.
You can follow the progress of the
programme in the display.
In addition to the cooking function and
temperature, the words "Heating-up
phase" or "Rapid heat-up phase" will
show in the display until the oven has
reached the set temperature.
Once the set temperature is reached, a
signal will sound (provided this is
activated - see "Settings - Volume -
Buzzer tones").
Then "Programme in progress" will
appear.
Selecting "Change" brings up all the
options which can be changed during
the current programme, e.g. the
selected temperature.
^
At the end of the cooking
programme, switch the appliance off
using the K sensor, and take the
food out of the oven.
The cooling fan will continue to run for a
while after the oven has been switched
off to prevent any humidity building up
in the oven, on the control panel or in
the oven housing unit.
The fan is sensor-controlled and will
switch off automatically.
You can change the default setting for
this (see "Settings - Cooling fan").
Manual operation
31

Miele H 5681 BPL Specifications

General

Type	Built-in oven
Appliance category	Oven
Oven type	Electric
Width	595 mm
Oven volume	76 L
Capacity	76 L
Energy efficiency class	A+
Temperature range	30 - 300 °C
Control type	Electronic
Self-cleaning	Yes
Power consumption	3.6 kW
Color	Black
Child lock	Yes
Timer	Yes
Warranty	2 years
Cleaning	Pyrolytic