Removing the back panel
,
Danger of injury!
Do not use the oven without the
back panel fitted.
The back panel can be removed for
cleaning purposes.
,
Danger of burning!
Make sure the oven heating
elements are switched off and the
oven interior is cool.
^
Disconnect the appliance from the
mains. Switch off at the wall and
withdraw the plug from the socket, or
disconnect the mains fuse or remove
the screw-out fuse in countries where
this is applicable.
^ Remove the shelf runners.
^ Undo the four screws in the corners
of the back panel and take it out.
^ Clean the back panel (see "Cleaning
and Care - Cleaning the catalytic
back panel").
Refit in the reverse order.
Carefully refit the back panel. The
air inlets must appear as they do in
"Oven overview".
^
Reconnect the oven to the electricity
supply.
Lowering the top heat/grill
element
,
Danger of burning!
Make sure the oven heating
elements are switched off and the
oven interior is cool.
^
Remove the shelf runners.
^ Undo the wing nuts.
Do not use force to lower the top
heat/grill element as this can cause
it to break.
^
Carefully lower the top heat/grill
element.
You can now clean the oven ceiling.
^
Raise the top heat/grill element and
tighten the wing nuts securely.
^
Refit the shelf runners.
Cleaning and care
57
To Next Page
Loading...
