Settings menu
100
WPS Push Button
As an alternative to networking your
dishwasher via the Miele@mobile App
we recommend using WPS (Wireless
Protected Setup). To do so you will
need a WPS-compatible router.
Select the WPS push button option.
Please wait... will appear in the display.
Activate the "WPS" function on your
router within two minutes.
Once connection has been estab-
lished, confirm with OK.
The dishwasher will then revert to the
Miele@home menu.
If the connection fails, you have prob-
ably not connected WPS to your router
quickly enough. Repeat the steps
above.
SmartStart
The SmartStartfunction is used for start-
ing your dishwasher automatically at a
time when your energy costs are most
economical.
Once SmartStart Permitted has been ac-
tivated, the Delay start menu for the pro-
gramme selected will no longer show
the EcoStartoption. Instead SmartStart
will appear in the display. The dish-
washer will then start within a timeframe
set by you once it receives the signal
from your energy provider.
If it has not received a signal from your
energy provider by the latest start time
set, the dishwasher will start automatic-
ally.
Select the setting you want and con-
firm with OK.
Confirm the message with OK.
To Next Page
Loading...
Need help?
General
