Miele KM 2256 - Operating Your Miele Gas Hob; Rapid Ignition and Controls

Rapid ignition system
The appliance is supplied with a rapid ignition system with
the following features:
–
After the flame is ignited, the hob control can be released
immediately.
–
Automatic re-ignition.
Should the flame be extinguished. e. g. by a gust of air, the
burner will re-ignite automatically.
If re-ignition is unsuccessful, the gas supply will be cut off
automatically (see "Safety switch-off").
Controls
The controls are used to switch on the burners and regulate
the strength of the flame.
Small, Medium, large and extra large burners
ß The gas supply is turned off
& Strongest flame
/ Weakest flame
Wok burner
ß The gas supply is turned off
& Strongest flame:
The inner and outer burners operate at the highest setting.
& Strong flame:
The outer burner operates at the lowest setting,
the inner burner at the highest setting
/ Weak flame:
The outer burner is switched off,
the inner burner operates at the highest settling
/ Weakest flame:
The outer burner is switched off
the inner burner operates at the lowest setting
Operation
19