To change the small jets
To change the small jets, the burner
securing screws must first be loosened
and the upper section of the appliance
removed.
^
Pull off the controls.
^
Then lift off the upper section.
Small, medium, large and extra large
burners
^
Using a small screwdriver, unscrew
small jet a in the gas fitting.
^
Pull out the jet with a pair of pliers.
^
Fit the correct jet securely (see jet
table).
^
Finally, secure the jets against
inadvertent loosening with sealing
wax.
Wok burner
a Small diameter jet
(e.g. for liquid gas: 0.23)
b Large diameter jet
(e.g. for liquid gas: 0.60)
^ Using a small screwdriver, unscrew
the two small jets a and b in the gas
fitting.
^
Pull out the jets with a pair of pliers.
^
Fit the correct jets securely (see jet
table).
^
Finally, secure the jets against
inadvertent loosening with sealing
wax.
Conversion to another type of gas
60
To Next Page
Loading...
