Installation
111
Installation
In order to reduce the risk of possible damage from
condensation, the furniture in the area around the commercial
dishwasher should be designed for commercial use.
The dishwasher must be installed in a secure and level position. Use
the four feet to compensate for any unevenness in the floor and
adjust the height of the machine.
If the dishwasher is to be installed next to other appliances and
furniture or in a recess, an installation space measuring at least 23
5/8" wide and 23 5/8" deep (60cm by 60cm) is required.
Undercounter
installation
To ensure the stability of undercounter commercial
dishwashers, these units may only be installed beneath a
continuous countertop that is bolted to adjacent cabinetry.
If the dishwasher is to be installed beneath a continuous countertop,
an installation space measuring at least 23 5/8" wide, 23 5/8" deep
and 32 1/4" high (60cm wide, 60cm deep, 82cm high) is required.
When adjusting the dishwasher height, the feet may only be
screwed out up to 2 1/4" (6cm).
If the dishwasher is equipped with a cover, it can be removed as
follows:
Remove both securing screws on the back of the dishwasher with a
screwdriver.
Open the door.
Unscrew the left and right fastening screws with a screwdriver.
Lift the appliance cover upwards to remove.
To Next Page
Loading...
