Miele PG 8056 - Display Settings (Contrast;Brightness)

Settings 
67
Display
If required, the time of day can be displayed once the waiting time
has elapsed (see Additional settings, Switch off after. The LED in the 
button will start to flash.
The dishwasher is ready for use when the time is visible in the
display. Pressing any button will reactivate it.
 Select Display and confirm your entry with theOK button.
The following options are available:
Display
Do not display
On
,
;
(
– Do not display
The time of day is not displayed. The dishwasher switches off at the
end of the preset waiting time.
– On
After the waiting time has elapsed, the time of day is displayed
continuously.
– On for 60 seconds
The time of day is displayed for 60seconds after the waiting time
has elapsed. After 60 seconds, the commercial dishwasher
switches itself off.
Select the setting you want and confirm your choice with the OK
button.
Clock format
 Select Time format and confirm your entry with theOK button.
The following options are available for clock format in the display:
Time format
(
24 h
12 h
– 12 h (am / pm)
– 24 h
 Select the desired format and confirm your choice with the
OKbutton.