Miele PG 8056 - Interim Rinse and Water Level

Additional settings
80
Increased amount
of water
 Select the Increased water level option and confirm your choice with
the OKbutton.
The amount of water used is indicated in liters and can be increased
by up to 1.5l in 0.5-liter increments.
Increased water level
0,0 l
(0,0 - 1,5 l)
 Use the arrow buttons (higher) and  (lower) to select the
desired amount of water, and confirm your selection with the
OKbutton.
Interim rinse
 Select the Interim rinse option and confirm your choice with the
OKbutton.
The following options are available:
Interim rinse
Yes
No
(
– Yes
The additional interim rinse is active.
– No
The additional interim rinse is inactive.
 Select the desired option and confirm your selection with the OK
button.