Miele PG 8056 - Starting and Monitoring Programs

Operation
51
Starting a program
 Press the Start/Stop button (the LED for the Start/Stop button will
light up).
Once it has been started, a program can no longer be changed.
A running program can either be interrupted (see "Interrupting a
program") or cancelled (see "Canceling a program").
Program cycle
display
After the start of a program, the wash phase and, for 10 seconds,
Program runningare shown in the display.
During the program cycle, the arrow buttons and can be used to
switch between the wash phase, the set temperature, and the actual
temperature in the second line of the display.
The time remaining is shown in the third line of the display.
Normal plus
Main wash
Duration
Min
23