IMPORTANT SAFETY INSTRUCTIONS
9
Ensure that the connection data on the data plate (voltage,
frequency, and fuse rating) match those of your electrical supply.
There must be no electrical sockets behind the commercial
dishwasher since the depth of the installation niche may be too small
and there is a danger of overheating if the dishwasher is pushed up
against a plug (see the "Electrical connection" chapter for more
information).
Do not connect the dishwasher to the electrical supply by a
multiple outlet box or an extension cable since they do not guarantee
the required safety of the appliance (e.g. danger of overheating).
Do not open the commercial dishwasher casing under any
circumstances. Tampering with electrical connections or components
and mechanical parts is highly dangerous to the user and can cause
operational faults.
The commercial dishwasher must not be used if the connecting
cable is damaged. If the cable is damaged, it must be replaced with a
special connecting cable available from Miele. For safety reasons, this
may only be performed by the Miele Service Department or an
authorized Miele Service dealer.
Before maintenance, disconnect the commercial dishwasher from
the electrical supply.
The plastic housing of the water connection contains electrical
components. It must not be dipped in water.
There are live wires in the water intake hose. Do not shorten the
water intake hose, even if it is too long.
To Next Page
Loading...
