Commissioning
24
Adding rinse aid
Press the button on the lid of the salt
reservoir in the direction of the arrow.
The flap will spring open.
Add rinse aid only until it is visible in
the opening.
The rinse aid reservoir holds approx.
110ml.
Close the flap firmly so that it clicks
into place. Otherwise water can enter
the rinse aid reservoir during a
programme.
Wipe up any spilled rinse aid. This
prevents over-foaming occurring
during the next programme.
You can adjust the rinse aid dosage
for best results (see "Settings menu -
Rinse aid").
Add rinse aid reminder
When the Add rinse aid message
appears, the reservoir contains
sufficient rinse aid for 2 - 3 programmes
only.
Add rinse aid in plenty of time.
Press the middle button to confirm.
The Add rinse aid reminder will go out.
To Next Page
Loading...
