Settings menu
76
Final rinse temperature
To facilitate drying the temperature of
the final rinse can be increased for
individual programmes. This function is
not available for all programmes (see
"Programme chart").
Select the desired setting and press
the middle button to confirm.
Water level plus
When Water level plus is activated, the
water intake is increased in the main
wash phase. This function is not
available for all programmes (see
"Programme chart").
Select the desired setting and press
the middle button to confirm.
Programme pre-selection
You can chose whether you want the
ECO programme or the last selected
programme to appear pre-selected in
the display when the dishwasher is
switched on.
Select the desired setting and press
the middle button to confirm.
Showroom programme
For demonstration purposes only.
The dishwasher is fitted with various
demonstration programmes for
showroom use.
– Demo with sound
This programme activates the pumps
to demonstrate the sound of the
dishwasher.
– Demo AutoOpen:
The door will open automatically.
To switch Demo mode on
Select the desired option.
Select On and confirm with the
middle button.
Close the Settings menu.
Press the Start/Stopbutton. The
demo mode is activated.
To switch Demo mode off
Demo mode will switch off
automatically when it reaches the end
of the cycle.
To Next Page
Loading...
