Miele PG 8080 - Starting a programme before the Delay start period has elapsed

Additional functions
43
 Press the Start/Stopbutton.
The Start/Stop indicator light will come
on.
If you do not press the Start/Stop
button within a few seconds after you
have set the Delay start time, the
programme duration will appear in the
display again. You will have to set the
Delay start time again.
The time starts counting down in
minutes until the programme start time.
At the end of the delay period, the
programme selected begins
automatically. The time left for a
programme to run is shown in the
display, the Delay start indicator light
goes out and the Start/Stop indicator
light comes on.
 To prevent children coming into
contact with dishwasher detergent:
Do not fill the detergent dispenser
until just before starting the
programme, i.e. before pressing the
Start/Stop button, and activate the
safety lock.
Starting a programme before the
Delay start period has elapsed:
A programme can be started before the
Delay start period has elapsed. Proceed
as follows:
 Press the Start/Stop button for at
least one second.
The Delay start indicator light will go out
and the Start/Stop indicator light will
flash.
 Press the Start/Stop button again.
The programme will start. The Start/
Stop indicator light will come on.