Miele PG 8080 - Troubleshooting display fault messages (FXX, Waterproof)

Problem solving guide
50
Problem Possible cause and remedy
One of the following
messages appears in
the display:
Before rectifying the problem, you must:
 Switch the dishwasher off with the button.
 Fault FXX
There may be a technical fault.
After a few seconds:
 Switch the dishwasher back on.
 Select the required programme.
 Press the Start/Stopbutton.
If the fault message appears again, there is a
technical fault.
 Call the Miele Professional Service Department.
 Waterproof
The Waterproof system has reacted.
 Turn off the tap.
 Call the Miele Professional Service Department.