Final spin speed
Programme rpm
Cottons 1500
Minimum iron 1200
Delicates 600
Woollens 1200
Express 1500
Automatic 1200
Shirts 600
Denim 900
Dark garments 1200
Spin 1500
You can reduce the final spin speed.
However, you cannot select a final spin
speed higher than that shown in the
chart above.
Rinse and interim spin
There is a spin after the main wash and
between the rinses. A reduction in the
final spin speed will also reduce the in-
terim spin speed. If a spin speed of
less than 700 rpm is selected for a
Cot
-
tons
programme, an additional rinse is
introduced.
To omit the final spin (Rinse hold)
^
Select the
Rinse hold
setting using
the
Spin speed
button. The laundry
will not be spun and will remain sus
-
pended in the final rinse water. This
reduces creasing if the laundry is not
going to be removed from the drum
immediately after the end of the pro
-
gramme.
–
To start the final spin
:
The washing machine will display the
maximum spin speed possible. You
can select a spin speed lower than
this. Start the final spin by pressing
the
Start/Stop
button.
– To end the programme
:
Press the
Door
button. The water will
drain away. Press the
Door
button
again to open the door.
To omit rinse and interim spin and
the final spin (No u)
^
Select the
No
u setting using the
Spin speed
button. The laundry is not
spun after the final rinse. The water
will drain away and the machine will
go straight into the anti-crease stage.
An additional rinse is introduced if
this setting is selected with the
Cot
-
tons
,
Minimum iron
,
Express
and
Automatic
programmes.
Spinning
19
To Next Page
Loading...
Need help?
General
