Levelling the machine
The machine must stand perfectly level
on all four feet to ensure safe and pro
-
per operation.
Incorrect installation may increase elec
-
tricity and water consumption and may
cause the machine to move about.
Screwing out and adjusting the feet
The four adjustable screw feet are used
to level the machine. All four feet are
screwed in when the machine is deli
-
vered.
^
Using the spanner supplied turn
counter nut 2 in a clockwise directi
-
on. Then turn counter nut 2 together
with foot 1 to unscrew.
^
Use a spirit level to check the machi
-
ne is standing level.
^ Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the spanner supplied until it
sits firmly up against the housing.
,
All four counternuts must be
firmly up against the housing. Please
also check this for the feet which did
not need adjustment. Otherwise the-
re is the danger of the machine mo-
ving about.
Installation and connection
46
To Next Page
Loading...
