Using the Electrobrush
The Electrobrush is particularly suitable
for intensive vacuuming of carpets
which are subject to hard wear. It is
very effective at removing deep seated
dirt and preventing areas of frequent
use being trodden into a path.
It is also important to observe the
flooring manufacturer's cleaning and
care instructions.
Do not use on carpets such as
saxony with very long-pile, berber
and sheepskin rugs, and valuable
hand-knotted carpets, e.g. Persian
and similar. There is a danger of the
threads being pulled out.
If in doubt, contact the carpet
manufacturer/retailer.
Floor surfaces with a variable or
uneven profile
If your cleaner is fitted with an SEB 217:
–
do not use it on variable or uneven
floor surfaces. The brush might come
into contact with the floor and cause
damage.
If your cleaner is fitted with an SEB 236:
–
adjust the height of the floor brush.
Preparing for use
11
To Next Page
Loading...
