All electrical work should be carried out
by a suitably qualified and competent
person in strict accordance with
national and local safety regulations.
The voltage and rated load are given
on the data plate located underneath
the vacuum cleaner. Please ensure that
these match the household mains
supply.
The appliance must be connected to a
230-240 V/50 Hz a.c. single phase
supply via a 10 A plug.
Important
The wires in the mains lead of this
appliance are coloured in accordance
with the following code:
Blue = Neutral
Brown = Live
As the colours of the wires may not
correspond with the markings
identifying the terminals in your plug,
proceed as follows: The wire coloured
blue must be connected to the terminal
marked with the letter "N" or coloured
black. The wire coloured brown must
be connected to the terminal marked
with the letter "A" or coloured red.
Neither core is to be connected to the
earth terminal of a three-pin plug.
Test marks.....................Electrical safety
............................................C-Tick Mark
Electrically suppressed
according to.....................AS/NZS 1044
Electrical connection
39
To Next Page
Loading...
