Unwinding and rewinding the
mains cable
Unwinding
^
Hold the plug and unwind cable to
the required length (S 785: max.
approx. 6.5 m / S 858 max. approx.
8.5 m).
,
When vacuuming for longer than
30 minutes, pull the cable out to at
least
2
/
3
of its total length, even when
working close to the wall socket.
Otherwise there is a danger of
overheating and damage.
Rewinding
^ Switch off at the wall socket and
remove the plug.
^ Press the rewind switch. The cable
will rewind automatically.
Auto-reverse
To switch on this function, move the
slide switch to "Auto-reverse". The
rewind brake on the cable drum is
released. It pays out the exact amount
of cable required and gathers in excess
cable so that the cable automatically
adjusts itself to the distance between
the appliance and the wall socket.
Operation
18
To Next Page
Loading...
