Park system
A Park system has been designed for
conveniently parking the vacuum
cleaner during pauses. A special park-
ing attachment is fitted to all floorheads,
including the Electrobrush SEB 217
(but not the Electrobrush SEB 236 as
this can be parked independently), and
to the rear of the cleaner.
^
Fit the lower clip on the floorhead into
the slot on the back of the vacuum
cleaner from above (see illustration).
Switching on and off with the Park
system
Parking the floorhead in this way whilst
vacuuming automatically switches off
the cleaner without needing to press
the On-Off switch. Lifting the floorhead
out of the Park system switches the
cleaner on again.
Transportation and storage
^
Stand the vacuum cleaner upright
when it is not being used and during
storage.
^
Fit both clips on the Electrobrush
SEB 217 into the two point holder on
the side of the cleaner (use Adapter
a with the standard floorhead,
turbobrush and other floor brushes).
This does not apply to the SEB 236,
which can stand independently.
This makes the cleaner easier to carry
or store.
Setting down, transportation and storage
23
To Next Page
Loading...
