Installation and connection
78
To avoid the risk of injury, the
holes for the transit bars must be
covered after the transit bars have
been removed.
Fit the covers onto the two holes.
Secure the transit bars to the back of
the washing machine. Make sure the
top catch is located above the holder.
The washing machine must not
be moved without the transit bars in
place. Store them as shown or keep
them in a safe place for future use.
They must be refitted if the machine
is to be moved again (e.g. when
moving house).
Refitting the transit bars
Refitting is carried out by reversing the
procedure.
To Next Page
Loading...
