Settings
106
Network
Miele@home
Control the networking of your wash-
ing machine with your WiFi network.
The following points may appear in the
submenu:
Set up
This message only appears if the wash-
ing machine has not yet been connec-
ted to a WiFi network.
Please refer to “Before using for the first
time” for instructions on how to set up
the connection.
Activate
(visible if Miele@home is deactivated)
The WiFi function is reactivated.
Deactivate
(visible if Miele@home is activated)
Miele@home remains set up, the WiFi
function is switched off.
Connection status
(visible if Miele@home is activated)
The following values are displayed:
- The quality of WiFi reception
- The network name
- The IP address
Set up again
(visible if set up)
Resets the WiFi login (network) to im-
mediately re-establish a new connec-
tion.
Reset
(visible if set up)
- The WiFi is switched off.
- The WiFi connection will be reset to
the factory default setting.
The network configuration should be re-
set whenever a washing machine is be-
ing disposed of or sold, or if a used
washing machine is being put into oper-
ation. This is the only way to ensure that
all personal data has been removed and
the previous owner will no longer be
able to access the washing machine.
A new connection setup has to be car-
ried out in order to use the
Miele@home setting again.
To Next Page
Loading...
