Installation
*INSTALLATION*
94
Connecting the water inlet hose
Screw the water inlet hose onto the
thread of the water inlet with the nut.
To prevent damage to the inner hose,
keep a tight hold of the valve housing
and only turn the nut.
Slowly open the stopcock and check
the connection for leaks.
Correct the position of the seal and
screw thread if necessary.
Maintenance
Only use a Miele Waterproof system
hose should you need a replacement.
Damage caused by dirty water.
This washing machine has a filter in
the hose connection to the casing to
protect the solenoid valve.
This filter must not be removed.
Hose extension
A 1.5 metre long (metal) extension hose
is available from your Miele dealer or
the Miele Spare Parts Department as an
optional extra.
This hose is tested to withstand pres-
sures of up to 14,000 kPa and can be
used as a flexible extension to the water
supply.
To Next Page
Loading...
