Miele WER865 WPS PWash&TDos - Start the calibration programme

Before using for the first time
26
6. Start the calibration pro-
gramme
For optimum water and energy con-
sumption and excellent wash results, it
is important to calibrate the washing
machine.
To do this, the Cottonsprogramme
must be run without laundry.
No other programmes can be started
until calibration has been carried out.
The following message will then appear
in the display:
Open the stopcock and start the Cottons
90°C programme with an empty drum
 Confirm with the OKsensor control.
The display will then change to the
standard display for the Cottonspro-
gramme.
 11:02
90 °C 1600

1:57
Cottons
h
Overview
Temperature Spin speed
TwinDos Extras
not selectedWhites
 Timer  Save
rpm
 Touch the Start/Stopsensor control.
The calibration programme then starts.
It will take approximately 2hours.
At the end of the programme the follow-
ing message will appear in the display:
Set up complete
 Reach under the door grip and pull
the door open.
Tip: Leave the door slightly open to al-
low the drum to dry.
 Switch the washing machine off with
the  control.