Miele WER865 WPS PWash&TDos - Commissioning TwinDos

Before using for the first time
23
5. Commissioning TwinDos
Skip Continue
Set up “TwinDos”?

 Touch the Continuesensor control to
set TwinDos up straight away.
Tip: To postpone setup until later: Touch
the Skipsensor control. The following
message will then appear in the display:
It is possible to set up later in “Settings” /
“TwinDos”.
Confirm with the OKsensor control.
Settings for compartment
The procedure for Miele UltraPhase 1
and Miele UltraPhase 2 is described be-
low. The procedure for other detergents
is similar.
No agent
Agent for comp. 
Miele
UltraPhase 1
Universal
detergent
Colour
detergent
Delicates
detergent
Delicates/
Woollens
OK
11:02
 Touch the Miele UltraPhase 1sensor
control.
The following message will then appear
in the display:
Please enter the dosing recommendation
of your detergent for a wash with normal
soiling. Take note of your water hardness
level.
The dispensing quantity for
UltraPhase1 is preset for  (hard-
ness level II).
58
57
56
59
60
Dosage for comp. 
ml
OK
11:02
 Confirm the preset value with the
OKsensor control, or change the
value.
UltraPhase1
 Hardness level I 46ml
 Hardness level II 58ml
 Hardness level III 70ml