Miele WER865 WPS PWash&TDos - Starting the programme

6.Starting the programme
39
Starting the programme
The programme can be started when
the Start/Stopsensor control is flashing
on and off.
 Touch the Start/Stopsensor control.
The door will lock and the programme
will start.
The programme status will appear in the
display.
 11:02

Cottons
Status
Time left
h2:27
Main wash
Add laundry

The washing machine will keep you up-
dated on the programme status and the
time remaining for the programme to
run.
If a delay start period has been selec-
ted, this will count down in the display
until the programme starts.
The drum lighting switches off once the
programme has started.
Energy savings
After 10minutes, the indicators dim.
The Start/Stop sensor flashes slowly.
To reactivate the indicators:
 Touch the Start/Stop sensor (this
does not have any effect on a pro-
gramme that is running).
Adding laundry during a pro-
gramme sequence (AddLoad)
Laundry can be added or removed at
any time.
 Touch the Add laundrysensor control.
The following appears in the display:
Please wait
The programme will stop and the door
will unlock.
The following appears in the display:
 11:02

Cottons
Status
Add laundry
The door can be opened.

 Open the door and add or remove
laundry.
 Close the door.
 Touch the Start/Stopsensor control.
The programme will continue.
Laundry cannot usually be added or re-
moved if:
- The suds temperature is above 55°C
- The water inside the drum is above a
certain level