Migatronic FLEX 3000C User Manual

QUICKGUIDE
FLEX 3000C/FLEX 3000 DUO
Displays:
1.
Press keypad A to view either welding
current (A), wire feed speed (m/min.) or
thickness of material (mm). When the
individual value is displayed, you can ad-
just it on the left control knob.
2. Press keypad B to view either trim of
welding voltage/arc length (V), the set
welding voltage (V), Arc adjust (electronic
choke/arc characteristics) or gas flow
(extra equipment).
3. Display of the welding programme chosen.
4. Display of for example voltage (V) on
wire end, mains voltage error, etc.
5. Display of number of sequences chosen,
display of currently chosen sequence plus
data, or display of the tack welding function.
The inside panel at the card reader:
6. The LED shines when the card has
been inserted correctly.
7. Watercooling on/off.
8. Keypad for wire inching.
9. Keypad for gas test.
50113652A
B
5
B
A
2
3
4
1
2
6
7
8
9

Migatronic FLEX 3000C Specifications

General

Brand	Migatronic
Model	FLEX 3000C
Category	Welding System
Language	English