17
FSB (part no.
76116381)
This remote control is equipped with a multidrive
potentiometer for easy and fine adjustment of the
welding current. (reduction ratio 1:6)
FSL (part no. 76116382)
An FSL remote control has the same function as the
FSB but is in a handy pocket size.
FHB (part no. 76116383)
The FHB remote control works like the models FSB
and FSL but can be used to increase the striking
current by setting the hot start control to increase the
set current by a specified percentage for one-second
surge every time when striking MMA electrodes
FSF (part no. 76116384)
This remote control is fitted with a footlever remote
control, and has two potentiometers and a cut-out.
Current adjustment is infinitely variable throughout the
range and is set by the potentiometer (pos. 1) and
(pos. 2).
1
2
To Next Page
Loading...
