Calibration Parameters
151
square root for the subsequent points. The following values are obtained:
Remarks and hints
An absorbing sponge layer damps the waves (per default) relative to the still
water level (surface elevation = 0) and zero flux. If you require a radiation
boundary with another reference value, you can specify the relevant level
(most often you only specify a surface elevation) through an option:
Grid Point Sponge Value
Land Point Land Point
17
23.9045
32.5947
41.9492
51.5955
61.3868
71.2572
81.1738
91.1187
10 1.0816
11 1.0565
12 1.0392
13 1.0273
14 1.0190
15 1.0132
16 1.0092
17 1.0064
18 1.0045
19 1.0031
20 1.0022
Open Water 1
To Next Page
Loading...