MIKE 21 BW - Island

2DH Boussinesq Wave Module - Examples
55
Binary data files
Parameter files
4.2.6 Island
Purpose of the example
We will consider the transformation of regular unidirectional and irregular
directional waves around an island with a moving shoreline, see Figure 4.31.
The combined effect of most of the wave phenomena of interest in coastal
engineering is included in this example; refraction, shoaling, diffraction,
reflection, bottom friction, nonlinear wave-wave interaction, wave breaking
and run-up.
Name: Bathymetry.dfs2
Description: Bathymetry data
Name: Sponge.dfs2
Description: Map of sponge coefficients
Name: Porosity.dfs2
Description: Map of porosity coefficients
Name: Tools Waves Generation Line.21t
Description: PFS file generation of internal wave boundary data
Name: DirectionalWaves.bw
Description: PFS file for setup of MIKE 21 BW run
Name: Plot Surface Elevation.plc
Description: PFS for 2D visualisation of the simulated surface elevation
using the MIKE Zero Plot Composer Grid Plot control
Name: Plot Wave Disturbance.plc
Description: PFS for 2D visualisation of the simulated wave disturbance
using the MIKE Zero Plot Composer Grid Plot control
Name: Anim Directional Waves with Roller.lyt
Description: PFS for 3D visualisation of the simulated surface elevation
using MIKE Animator Plus