Reference Manual
158 MIKE 21 BW - © DHI
Figure 5.43 Example of line series of surface elevation on a coastal profile modelled
by MIKE 21 BW 1DH
5.4.2 Phase-averaged parameters
In this output dialog you define the number of output files. The specification of
the individual output files is made subsequently. For each output file you
specify which type of data you would like to store, the temporal/spatial range
and frequency as will as a name and title of the file.
Figure 5.44 The list of phase-averaged output parameters includes various varia-
bles for detailed analysis and presentation
Wave statistics
You can select between following two types of wave statistics
Cumulative statistics
Subseries statistics
and whether the phase-averaging should cover the swash zone or not.
If you select “Cumulative statistics” your specified output items will be
updated regularly corresponding to the specified update interval. In case of
“subseries statistics” your output items will be set to zero at the update inter-
val. In most cases you would select “Cumulative statistics”.
NOTE:
To Next Page
Loading...