Output Parameters
153
Output type
You can choose between following output types:
Type 0: point series data (dfs0 file)
Type 1: line series data (dfs1 file)
Type 2: grid series data (dfs2 file)
For point series data (type 0) you can choose a number of different points in
each file.
You can view the results easily using the relevant MIKE Zero tools by clicking
on the “View” button or by e.g. presenting the results using Plot Composer as
in Figure 5.38.
Figure 5.38 Example of 2D map and time series of surface elevation in two selected
points
To Next Page
Loading...