Output Parameters
157
Figure 5.42 Example of 2D map and time series of surface elevation in two selected
points
Remarks and hints
When you specify the spatial range of your output data you also have to
specify the number of points you would like to save, N
points
. The output result
is interpolated to a grid having the constant spatial resolution of (J
last
-
J
first
+1)/N
points
.
In case you use a structured mesh of the bathymetry we recommend you to
use the suggested default value of N
points
(=J
last
-J
first
+1). For unstructured
meshes (1DH application only) we recommend you to use a larger value of
N
points
, in order to have a high resolution in the surf and swash zone. Further
it is recommended (for unstructured meshes) to save the entire profile of
data, i.e. keep the default values of J
first
and J
last
.
To Next Page
Loading...