MikroTik Wireless Wire Cube User Manual

1.
2.
3.
As an additional option, you can use "quickMOUNT-X" – mounting bracket for an easy adjustment that can be obtained separately. Product web page: https
://mikrotik.com/product/qm_x
Specially designed enables vertical and horizontal adjustment on the pole.
Grounding
The device includes a grounding connection (marked ) which you should connect to the grounding installation of the tower or building where the device will
be used. This is to substantially reduce the risk of ESD and lightning damage.
Powering
The Cube Lite60 accepts DC power from Passive PoE injectors (one power supply and PoE injector are included) accepts 12-28 V DC consuming at
maximum load 4 W.
Connecting to a PoE Adapter:
Connect the Ethernet cable from the device to the PoE+DATA port of the PoE adapter.
Connect an Ethernet cable from your local network (LAN) to the PoE adapter.
Connect the power cord to the adapter, and then plug the power cord into a power outlet.
Extension Slots and Ports
10/100 Ethernet port.
Integrated 5 GHz 802.11a/n/ac interface with built-in antenna.
WiGig chipset QCA6335.
Reset button
The routerBOOT reset button has the following functions. Press the button and apply the power, then:
Release the button when green LED starts flashing, to reset RouterOS configuration to defaults.
Release the button when the LED turns solid green to clear all configuration and defaults.
Release the button after LED is no longer lit (~20 seconds) to cause the device to look for Netinstall servers (required for reinstalling RouterOS
over the network).
Regardless of the above option used, the system will load the backup RouterBOOT loader if the button is pressed before power is applied to the device.
Useful for RouterBOOT debugging and recovery.
Accessories
It's recommended to secure Ethernet cable to the pole using zip ties. With the distance from the device approximately 30 cm.

MikroTik Wireless Wire Cube Specifications

General

Flash memory	16 MB
Internal memory	256 MB
Processor model	IPQ4019
Built-in processor	Yes
Processor frequency	716 MHz
Processor manufacturer	Qualcomm
Operating system installed	RouterOS
2.4 GHz	No
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11n, IEEE 802.3af, IEEE 802.3at
Receiver sensitivity	-93 (6MBit/s), -74 (54MBit/s), -93 (MCS0), -71 (MCS7), -68 (MCS9)
Maximum outdoor range	800 m
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Mean time between failures (MTBF)	200000 h
Maximum data transfer rate (5 GHz)	433 Mbit/s
Operating temperature (T-T)	-40 - 70 °C
Placement	Pole, Wall
Certification	CE, FCC, IC, EAC, RoHS
Product color	White
Output current	0.8 A
Output voltage	24 V
AC input voltage	12 - 57 V
Power consumption (max)	9 W
Antenna type	Internal
Antenna gain level (max)	11.5 dBi
Number of products included	1 pc(s)
USB 2.0 ports quantity	0
Ethernet LAN (RJ-45) ports	1
Security algorithms	-

Weight and Dimensions

Width	130 mm
Height	132 mm