and Android system. Both H.265&H.264 video codec are supported in Plugin-Free Mode for
camera, and it will play the secondary stream by default.
Note:
① You need to upgrade camera to V4x.7.0.70 or above to use Plugin-Free Mode.
② If you use Chrome browser, Plugin-Free mode is only supported when the browser version is V69 or above.
③ If you use Firefox browser, Plugin-Free mode is only supported when the browser version is V65 or above.
(1) On Chrome browser
Step1: Access camera via Chrome browser.
Step2: Click “ ” icon in the lower left corner of the webpage, you can refer to Plugin-Free Mode
instruction below.
Step3: Input the URL in address bar: chrome://flags/#enable-webassembly-threads
You will enter the webpage shown below.
To Next Page
Loading...
